SOPREMAPOOL PREMIUM is a PVC-P synthetic membrane for swimming pools reinforced with polyester mesh and nominal thickness 1.5 mm. SOPREMAPOOL PREMIUM  is made up of multiple colours.


  • Flexible
  • Smooth
  • Varnish coating
  • Intense and multiple colours

Membranes manufactured with high quality raw materials (resins, plasticisers, stabilisers and pigments).

They are made up of four layers with different and complementary formulations, introducing a reinforcing and perfectly centred polyester mesh between the second and third layers. This reinforcement provides the membrane with great tensile strength and high dimensional stability.

The varnished coating provides greater durability and resistance to colour fading, chlorine, stains, microorganisms and UV rays.

Manufactured by a cast process according to European standard EN 15836-2 (2010).

Light Blue, Azure Blue, Dark Blue, Wild Musk, Sand, White, Light Grey, Medium Grey, Basalt Grey and Black.

All colours are available in the non-slip finish except Dark Blue and Wild Musk.


  • For newly built pools or renovation of existing ones.
  • On any kind of support: concrete, cement, steel prefab panels.
  • On an incompatible support (resins, polystyrene panels etc.), position a special Soprema separation geotextile.
  • The pool water temperature must never exceed 32°C.


12 years for waterproofing.
3 years for stains caused by bacteria.


The welding of SOPREMAPOOL PREMIUM must be performed with a hot air Leister gun respecting current installation regulations. Clean and dry membrane edges are essential for successful welding.


Do not use aggressive products to clean SOPREMAPOOL PREMIUM as they may damage the liner and remove the decorative surface finishing.

It is advisable to use a soapy water solution and avoid using abrasive products.

Proper water treatment must be ensured for the entire service life of Sopremapool membranes. Check the “Maintenance instructions”.


Associated products