SOPREMAPOOL DESIGN is a PVC-P synthetic membrane for swimming pool reinforced with polyester scrim, nominal thickness 1,5 mm and with decorative finishing and double varnish (in the mass and on the surface) for maximum protection. Manufactured by cast process according to European standard EN 15836-2 (2010).



• For new or renovation of existing swimming pools
• On any kind of support concrete, cement, steel prefab panels
• On incompatible support (resins, polystyrene panels etc.), provide the positioning of a special Soprema separation geotextile
• The pool water temperature must never exceed 32°C.

The welding of SOPREMAPOOL DESIGN must be performed with hot air Leister gun. For a correct welding, the edge of the liner must be clean and dry.

Do not use aggressive products to clean SOPREMAPOOL DESIGN, they may damage the liner and remove decorative finishing. It is advisable to use a soapy water solution and avoid using abrasive products.
Proper water treatment must be guaranteed for the entire service life of Sopremapool membrane.  


The SOPREMAPOOL DESIGN is delivered in rolls, laid on wood pallets, protected, separated and externally wrapped with polyethylene sheets. Rolls should be stored horizontally in their original packages, in a dry and temperate area (10-30°C). The rolls must be protected by humidity and atmospheric agents (sun, rain etc.)